Balancing Wine Bottle Stand
💙 Handmade with Love 💙
This mold makes a gravity defying balancing wine bottle stand!
⚠️ Helpful tips: for best results, use at least one layer of a super hard curing resin (such as a countertop or topcoating resin). Also make sure resin is fully cured before using - some resins can take 30 days or more to reach full cure (refer to your brand's instructions). This will ensure the bottle stand does not become warped under the weight of the wine.
For the first layer, I used Magic Resin Art & Craft epoxy (https://magicresin.ca).
For subsequent layers, I used iCoat casting resin HV (https://tinyurl.com/iCoatcastingHV)
Dimensions of Finished Casting:
• 9 3/4" long, 2" wide, and is 1 1/8" deep (24.8cm long, 5cm wide, 2.8cm deep).
• Requires approximately 325ml/11 fl oz of resin
--------------------------------------------------------------
• All surfaces inside the mold are smooth and shiny - no more sanding/polishing your finished piece!
• Made from high quality platinum cure silicone - will last many years and can be used over and over again
• Temperature safe up to 450° F.
• Not mass produced - lovingly handmade by me right here in Canada
--------------------------------------------------------------
Our favourite resin is iCoat casting resin HV which you can purchase here: https://tinyurl.com/iCoatcastingHV
Use code ModMold10 for 10% off your order!
--------------------------------------------------------------
{Duties/Import Taxes}
US citizens!! Did you know that you can import up to $800US worth of our products in one shipment without having to pay customs/duties? If you order more than that we will divide your shipment so that each parcel is less than $800US.
--------------------------------------------------------------
I love seeing what you create with my molds!
Send me pictures or tag me on Instagram - @modernmoldshop or use #modernmoldshop
--------------------------------------------------------------
