Cake Stand Mold
$140.00
$205.00
$295.00
$140.00
💙 Handmade with Love 💙
Â
This mold makes a beautiful cake stand. There are two separate parts to the mold - the top and the base. To assemble once the two parts are completed and unmolded, add a small amount of resin to the indent in the top of the cake stand and insert the small end of the base. Allow to cure before using.
For best results, use a hard curing resin for the top of the cake stand (such as iCoat Medium Viscosity resin).
There are three options available (see below for dimensions):
Option A - One cake stand base mold plus one 1/2" faceted top mold
Option B - One cake stand base mold plus one 2" deep top mold
Option C - One cake stand base mold, one 1/2" faceted top mold, and one 2" deep top mold
Dimensions of Finished Casting:
Cake Stand Base
• 3" tall and 2 3/4" at widest point (7.6cm x 7cm).
• Requires approximately 240ml/8 fl oz of resin
Cake Stand Top Option A
• 10 3/4" diameter and 1/2" deep (27.3cm x 1.3cm).
• Requires approximately 750ml/25 fl oz of resin
Cake Stand Top Option B
• 9" diameter and 2" deep (22.8cm x 5cm).
• Requires approximately 2100ml/71 fl oz of resin
--------------------------------------------------------------
• All surfaces inside the mold are smooth and shiny - no more sanding/polishing your finished piece!
• Made from high quality platinum cure silicone - will last many years and can be used over and over again
• Temperature safe up to 450° F.
• Not mass produced - lovingly handmade by me right here in Canada
--------------------------------------------------------------
Our favourite resin is iCoat casting resin HV which you can purchase here: https://tinyurl.com/iCoatcastingHV
Use code ModMold10 for 10% off your order!
--------------------------------------------------------------
{Duties/Import Taxes}
US citizens!! Did you know that you can import up to $800US worth of our products in one shipment without having to pay customs/duties? If you order more than that we will divide your shipment so that each parcel is less than $800US.
--------------------------------------------------------------
I love seeing what you create with my molds!
Send me pictures or tag me on Instagram - @modernmoldshop or use #modernmoldshop
--------------------------------------------------------------
Â
This mold makes a beautiful cake stand. There are two separate parts to the mold - the top and the base. To assemble once the two parts are completed and unmolded, add a small amount of resin to the indent in the top of the cake stand and insert the small end of the base. Allow to cure before using.
For best results, use a hard curing resin for the top of the cake stand (such as iCoat Medium Viscosity resin).
There are three options available (see below for dimensions):
Option A - One cake stand base mold plus one 1/2" faceted top mold
Option B - One cake stand base mold plus one 2" deep top mold
Option C - One cake stand base mold, one 1/2" faceted top mold, and one 2" deep top mold
Dimensions of Finished Casting:
Cake Stand Base
• 3" tall and 2 3/4" at widest point (7.6cm x 7cm).
• Requires approximately 240ml/8 fl oz of resin
Cake Stand Top Option A
• 10 3/4" diameter and 1/2" deep (27.3cm x 1.3cm).
• Requires approximately 750ml/25 fl oz of resin
Cake Stand Top Option B
• 9" diameter and 2" deep (22.8cm x 5cm).
• Requires approximately 2100ml/71 fl oz of resin
--------------------------------------------------------------
• All surfaces inside the mold are smooth and shiny - no more sanding/polishing your finished piece!
• Made from high quality platinum cure silicone - will last many years and can be used over and over again
• Temperature safe up to 450° F.
• Not mass produced - lovingly handmade by me right here in Canada
--------------------------------------------------------------
Our favourite resin is iCoat casting resin HV which you can purchase here: https://tinyurl.com/iCoatcastingHV
Use code ModMold10 for 10% off your order!
--------------------------------------------------------------
{Duties/Import Taxes}
US citizens!! Did you know that you can import up to $800US worth of our products in one shipment without having to pay customs/duties? If you order more than that we will divide your shipment so that each parcel is less than $800US.
--------------------------------------------------------------
I love seeing what you create with my molds!
Send me pictures or tag me on Instagram - @modernmoldshop or use #modernmoldshop
--------------------------------------------------------------
Style
Option A - 1/2" Faceted Top
Option B - 2" Deep Top
Option C - Combo
Style